Equipment
Other Machinery
Welding Positioners
1986 ARONSON RHS10/T2.5-30SD/RLA-CY
Sold

1986 ARONSON RHS10/T2.5-30SD/RLA-CY

Sell Your ARONSON RHS10/T2.5-30SD/RLA-CY
Welding Positioners
Manufacturer:
ARONSON
Model:
RHS10/T2.5-30SD/RLA-CY
Year:
1986
Stock #:
K11791
Serial #:
869
2500 LB ARONSON MODEL "SKYHOOK" WELDING POSITIONER, 360 Degree Tilt, 360 Degree Rotate, 38" Table with 18-1/2" Thru Hole, New 1986.

38" Table with (4) 3/4" Radial T-Slots, 18.5" Thru-Hole, Getty's Servo Motors and Encoders, Automatic Backlash Control, Auxiliary Brake on Input Shaft, Zero Pin and Visual Zero Indicator, NEMA Dust Tight Electronics.

MACHINE DESCRIPTION:
The Aronson "SKYHOOK" is Designed to give you Full 360° of Tilt along with 360° of Rotation. This is accomplished by Mounting a Turn Table onto a Horizontal Beam and then Mounting the Horizontal Beam onto a Headstock. The Beam is Mounted 24" Below the Tilt Axis of the Headstock and the Turn Table Center is 30" From the Headstock. The Turn Table is 38" in Diameter and uses Pre-loaded Slew-ring roller bearings which provides an 18-1/2" Diameter Thru-Hole in the Table. Both Axes are Getty's Servo Motors and Feedback Encoders.

Table Diameter: 38"
Hole Thru Center of Table: 18.5"
Max Swing: 60"
Table Weight Load Capacity: 2,500 LBS
Table Weight Load Capacity 48: 2,500 LBS
Range of Work Rotation Speeds (+/- 10% Allowable Inf Var): 0 to 2 RPM
Rotation Torque: 7,500 LB/IN
Tilt Speed: 0 to 2 RPM
Tilt Torque: 60,000 LB/IN
Floor to Table Top: 36"
Electrics: 440/3/60
Approximate Dimensions: 92" x 92"
Approximate Height: 88"
Approximate Weight: 7,500 LBS

CONDITION: This Positioner Appears to be in Excellent Condition! New Replacement Cost from Aronson is Over $ 78,000. !

F.O.B. Cincinnati, OH

We use cookies to improve your experience. Privacy Policy.

Accept