Vee Arc High Performance Variable Motor Drive Systems, Swing Down Internal Grinding Attachment, Long Reach Internal Spindles, Variety of Internal Grinding Quills, Live / Dead / Fully Variable Workhead, Plunge and Dual Terry Grinding Cycles, 3 Work Rest, Stainless Splash Guard.
| Swing Down Internal Attachment | Yes | Yes |
| Max Grinding Diameter | 26" | 660.4 mm |
| Max Distance Between Centers | 96" | 2,438.4 mm |
| Max Grinding Wheel Diameter | 14" | 355.6 mm |
| Max Grinding Wheel Width | 1.5" | 38.1 mm |
| Grinding Wheel Hole Diameter | 5" | 127 mm |
| Wheelhead Handle Feed Amount per Turn | Low 0.050", High 0.200" | 5.08 mm |
| Wheelhead Handle Feed Amount per Graduation | 0.000050" | 0.0013 mm |
| Wheelhead Swivel Range | 90° Lower Swivel, Right & Left | 30° Upper Swivel, Right & Left | 120° |
| Wheelhead Power | 5 hp | 3.7 kW |
| Workhead Power | 1 hp | 0.7 kW |
| Workhead Speed | 25 - 200 RPM (± 10% Allowable Inf Var) | 200 RPM |
| Table Rapid Traverse Rate | 3 - 220 in/min. | 5.6 m/min. |
| Table Swivel Angle Toward Wheelhead | 90° | 90° |
| Table Swivel Angle Away From Wheelhead | 30° | 30° |
| Plunge (Yes/No) | Yes | Yes |
| Gauging (Yes, No) | No | No |
| Dimensions | 148" L x 74" H | 49" Floor to Spindle Center | 148" L x 74" H | 49" Floor to Spindle Center |
Max Diameter Ground: 26"
Max Distance Between Centers: 96"
Grinding Wheelhead: Swivel Range - Lower Swivel, Right & Left: 90°
Grinding Wheelhead: Upper Swivel, Right & Left: 30°
Grinding Wheels Regularly Supplied (Diameter x Face x Hole): 14" x 1-1/2" x 5"
Automatic Infeed at Table Reversal (Diameter Reduction): 0.0002" - 0.005"
Pickfeed Selections: Right End Only, Left End Only: yes
Pickfeed Selections: Right and Left Ends: yes
Wheelhead Movement Per Turn of Crossfeed Handwheel: Low 0.050", High 0.200"
Minimum Infeed Increment in Terms of Diameter Reduction: 0.000050"
Taper Hole in Headstock and Footstock Spindles: No. 10 B & S
Range of Work Rotation Speeds (+/- 10% Allowable Inf Var): 25-200 RPM
Headstock Swivel Toward Wheelhead: 90°
Headstock Swivel Away from Wheelhead: 30°
Number of Table Traverse Speeds: 3 - 220 IPM
Minimum Movement Required to Reverse Table: 3/32"
Accuracy of Table Reversal at All Traverse Rates: 0.004"
Independent Right-Hand & Left-Hand Tarry Adjustment: 0-5 Seconds
Mechanical Hand Table Traverse per Rev of Handwheel: Rapid 15/16", Slow. 0.2"
Wheelhead Motor: 5 HP
Hydraulic Pump Motor: 1-1/2 HP
Headstock Motor: 1 HP
Internal Grinding Attachment Motor: 2 HP
Cutting Fluid Pump Motor: 1/4 HP
Approximate Machine Height: 74"
Floor to Spindle Center: 49"
Overall Length: 148"
Under Power for Inspection by Appointment.
Midwestern Location
We use cookies to improve your experience. Privacy Policy.
We use different type of cookies to optimize your experience on our website. You may choose which type of cookies to allow and can change your preferences at any time. Remember that disabling cookies may affect your experience on the website. You can learn more about how we cookies by visiting our Privacy Policy.
These cookies are necessary to the core functionality our website and some of its features, such as access to secure areas.
These cookies are used to enhance the performance and functionality of our website but are nonessential. However, without these cookies, certain functionality may become unavailable.
These cookies gather information to help us understand site usage, measure marketing effectiveness, and personalize your experience.
These cookies enhance ad relevance, prevent repeat ads, ensure proper display, and sometimes tailor ads to your interests.
