Stock #: K13418
Brand: CARLTON
Model: 4A
Type: Drills, Radial
Condition: Very Good
Year: 1952
96" x 172" T-Slotted Floor Plate, Power Elevation, Power Clamping on Arm, Power Clamping on Head, Rapid Traverse on Head, Tapping.
Specifications: |
|
|---|---|
| Arm Length | 10' |
| Column Diameter | 26" |
| Working Surface of Base (T-Slotted) | 96" x 175" |
| Drills to Center of Circle on Base | 138" |
| Travel of Column on Rails | 172" |
| Vertical Spindle Travel in Head | 24" |
| Vertical Arm Travel on Column | 56" |
| Horizontal Head Travel on Arm | 92" |
| Max Distance Spindle to Base | 78" |
| Min Distance Spindle to Base | 10-1/2" |
| Max Distance Face of Column to Spindle | 120" |
| Min Distance Face of Column to Spindle | 16-1/2" |
| Spindle Taper | #6 MT |
| Spindle Diameter | 4" |
| Spindle Speed Range | 15 - 1,500 RPM |
| Spindle Feeds Range | .001 - .125 IPM |
| Tapping Leads Range | 8 - 18 TPI |
| Motor Horsepower | 20 HP |
| Electrics | 220/440/3/60 |
| Approximate Machine Height | 10'10" |
| Approximate Machine Weight | 50,500 LBS |
CONDITION: This Machine Appears to be in Very Good Condition !
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Equipped With |
|---|
|
96" x 172" T-Slotted Floor Plate, Power Elevation, Power Clamping on Arm, Power Clamping on Head, Rapid Traverse on Head, Tapping. |
Specifications |
|
|---|---|
| Arm Length | 10' |
| Column Diameter | 26" |
| Working Surface of Base (T-Slotted) | 96" x 175" |
| Drills to Center of Circle on Base | 138" |
| Travel of Column on Rails | 172" |
| Vertical Spindle Travel in Head | 24" |
| Vertical Arm Travel on Column | 56" |
| Horizontal Head Travel on Arm | 92" |
| Max Distance Spindle to Base | 78" |
| Min Distance Spindle to Base | 10-1/2" |
| Max Distance Face of Column to Spindle | 120" |
| Min Distance Face of Column to Spindle | 16-1/2" |
| Spindle Taper | #6 MT |
| Spindle Diameter | 4" |
| Spindle Speed Range | 15 - 1,500 RPM |
| Spindle Feeds Range | .001 - .125 IPM |
| Tapping Leads Range | 8 - 18 TPI |
| Motor Horsepower | 20 HP |
| Electrics | 220/440/3/60 |
| Approximate Machine Height | 10'10" |
| Approximate Machine Weight | 50,500 LBS |
| CONDITION: This Machine Appears to be in Very Good Condition ! |
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
© 2024 — Great American Equipment Company. All Rights Reserved. — Privacy Policy. — Archive
