Stock #: Q10555
Brand: WALDRICH
Model: WSIII 40
Type: Grinders, Roll
Condition: Very Good
Year: 1965
Traveling Wheelhead Design, Crowning Capability, Wheel Balancing Spindle, Tailstock Mounted Adjustable Wheel Dresser, Rapid Traverse, 29" Face Plate, 21" 4-Jaw Chuck, Sliding Steel Way Covers on Bed, (9) Small Work Rests, (2) Large Work Rests, Barnes Coolant and Filtration System, Magnetic Chip Separator.
Specifications: |
|
---|---|
Max Work Diameter | 39 5/8" (1000 mm) |
Min Work Diameter | 6" (150 mm) |
Max Grinding Diameter | 40" |
Min Grinding Diameter | 0.75" |
Distance Between Centers | 393" (10,000 mm) |
Max Weight Capacity Between Centers | 10 Tons |
Max Weight Capacity with Steady Rests | 20 Tons |
Max Grinding Wheel Diameter | 30" |
Max Grinding Wheel Width | 4" |
Grinding Wheel Hole Diameter | 12.007" |
Wheelhead Horsepower | 30 HP DC 220V |
Headstock Speed Range | 7 - 49 RPM (8 increments) |
Normal Infeed | 0.0004" - 0.028" |
Carriage Feed | 2.375 - 118 IPM |
Crowning (Yes/No) | yes |
Approximate Machine Weight | 116,000 LBS |
CONDITION: Machine Appears to be in Very Good Condition.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Equipped With |
---|
Traveling Wheelhead Design, Crowning Capability, Wheel Balancing Spindle, Tailstock Mounted Adjustable Wheel Dresser, Rapid Traverse, 29" Face Plate, 21" 4-Jaw Chuck, Sliding Steel Way Covers on Bed, (9) Small Work Rests, (2) Large Work Rests, Barnes Coolant and Filtration System, Magnetic Chip Separator. |
Specifications |
|
---|---|
Max Work Diameter | 39 5/8" (1000 mm) |
Min Work Diameter | 6" (150 mm) |
Max Grinding Diameter | 40" |
Min Grinding Diameter | 0.75" |
Distance Between Centers | 393" (10,000 mm) |
Max Weight Capacity Between Centers | 10 Tons |
Max Weight Capacity with Steady Rests | 20 Tons |
Max Grinding Wheel Diameter | 30" |
Max Grinding Wheel Width | 4" |
Grinding Wheel Hole Diameter | 12.007" |
Wheelhead Horsepower | 30 HP DC 220V |
Headstock Speed Range | 7 - 49 RPM (8 increments) |
Normal Infeed | 0.0004" - 0.028" |
Carriage Feed | 2.375 - 118 IPM |
Crowning (Yes/No) | yes |
Approximate Machine Weight | 116,000 LBS |
CONDITION: Machine Appears to be in Very Good Condition. |
Files
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.