ARONSON "SKYHOOK" 2500 LB WELDING POSITIONER

Stock #: K11791

Brand: ARONSON
Model: RHS10/T2.5-30SD/RLA-CY
Type: Welding Positioners
Condition: Excellent
Year: 1986

Equipped With:

        

38" Table with (4) 3/4" Radial T-Slots, 18.5" Thru-Hole, Getty's Servo Motors and Encoders, Automatic Backlash Control, Auxiliary Brake on Input Shaft, Zero Pin and Visual Zero Indicator, NEMA Dust Tight Electronics.

MACHINE DESCRIPTION:
The Aronson "SKYHOOK" is Designed to give you Full 360 Degrees of Tilt along with 360 Degrees of Rotation. This is accomplished by Mounting a Turn Table onto a Horizontal Beam and then Mounting the Horizontal Beam onto a Headstock. The Beam is Mounted 24" Below the Tilt Axis of the Headstock and the Turn Table Center is 30" From the Headstock. The Turn Table is 38" in Diameter and uses Pre-loaded Slew-ring roller bearings which provides an 18-1/2" Diameter Thru-Hole in the Table. Both Axis are equipped with Getty's Servo Motors and Feedback Encoders.

Specifications:

Table Diameter 38"
Hole Thru Center of Table 18.5"
Max Swing 60"
Table Weight Load Capacity 2,500 LBS
Table Weight Load Capacity 48" Above Table 2,500 LBS
Range of Work Rotation Speeds (+/- 10% Allowable Inf Var) 0 to 2 RPM
Rotation Torque 7,500 LB/IN
Tilt Speed 0 to 2 RPM
Tilt Torque. 60,000 LB/IN
Floor to Table Top 36"
Electrics 440/3/60
Approximate Machine Dimensions 92" x 92"
Approximate Machine Height 88"
Approximate Machine Weight 7,500 LBS
CONDITION:  Appears to be in Excellent Condition! New Replacement Cost from Aronson is Over $ 78,000. !

ARONSON "SKYHOOK" 2500 LB WELDING POSITIONER

Fields marked with * are required.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Fields marked with * are required.


      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Brand
      ARONSON

      Model
      RHS10/T2.5-30SD/RLA-CY

      Type
      Welding Positioners

      Stock #
      K11791

      Condition
      Excellent

      Year
      1986

      Request a Quote Today!

      Get Started

      Equipped With


      38" Table with (4) 3/4" Radial T-Slots, 18.5" Thru-Hole, Getty's Servo Motors and Encoders, Automatic Backlash Control, Auxiliary Brake on Input Shaft, Zero Pin and Visual Zero Indicator, NEMA Dust Tight Electronics.

      MACHINE DESCRIPTION:
      The Aronson "SKYHOOK" is Designed to give you Full 360 Degrees of Tilt along with 360 Degrees of Rotation. This is accomplished by Mounting a Turn Table onto a Horizontal Beam and then Mounting the Horizontal Beam onto a Headstock. The Beam is Mounted 24" Below the Tilt Axis of the Headstock and the Turn Table Center is 30" From the Headstock. The Turn Table is 38" in Diameter and uses Pre-loaded Slew-ring roller bearings which provides an 18-1/2" Diameter Thru-Hole in the Table. Both Axis are equipped with Getty's Servo Motors and Feedback Encoders.

      Specifications

      Table Diameter 38"
      Hole Thru Center of Table 18.5"
      Max Swing 60"
      Table Weight Load Capacity 2,500 LBS
      Table Weight Load Capacity 48" Above Table 2,500 LBS
      Range of Work Rotation Speeds (+/- 10% Allowable Inf Var) 0 to 2 RPM
      Rotation Torque 7,500 LB/IN
      Tilt Speed 0 to 2 RPM
      Tilt Torque. 60,000 LB/IN
      Floor to Table Top 36"
      Electrics 440/3/60
      Approximate Machine Dimensions 92" x 92"
      Approximate Machine Height 88"
      Approximate Machine Weight 7,500 LBS
      CONDITION: Appears to be in Excellent Condition! New Replacement Cost from Aronson is Over $ 78,000. !

      Fields marked with * are required.

        This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

        Fields marked with * are required.


          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.