Don't Miss Out!

.031 - .037"x 10" Technidrill 4 Spindle Gun Drill

Stock #: Q10010

Brand: TECHNIDRILL
Model: .250-4-1A-10
Type: Drills, Gun
Condition: Used
Year: 2005

Equipped With:

        
Cutler & Hammer Panelmate Programable PLC Control, Programable Variable Spindle Speed and Ballscrew Servo Feed, Pnuematic Part Clamping, Readouts, Load Meters, Dual Barnes High Pressure Oil Based Coolant with Turbo Magnectic Seperator and Magnectic Conveyor, Note: This 4 Spindle Gun Drill was Originally built by Technidrill in year 2000 with serial number 7208-02/00. It was redone in 2005 by Technidrill and Given a New serial Number 7277. At that time it was setup and fixtured with Pnuematic Clamping to put a .2165" hole x 5.94" deep in a shaft that was aproximately 1" diameter 8 .5 " Long. Drilling time was 1.81 Minutes for this Part. The Spindle Speed was 4675 rpm with carbide tipped gun drill in steel that was 225 Brinell Hardness. This Gun drill is Essentially Two (2) Spindle Gun Drills Mounted Side by Side on a Common Base and Divided by A See-thru Partition. Each Side or 2 Spindle Set has it's own High Pressure Coolant System. A New Machine is Aproximately $ 450,000. In 2005 Technidrill Charged Aproximatelly $ 1,700 to re-tool it and $ 23,000 for fixturing and Pnuematic Part Clamping for the previous mentioned Part. This Machine Can be Economically Altered for Any Part, for Example the Spindle Speed Range is just New Belts and Pulleys for about $ 1,200. New Gundrill hole sizes, bushings, box Carriers and seals are about $600 per spindle. This Machine Comes with an Extensive Set of Manuals and Prints. Cosmetics are a 9+ out of 10. 

SPECIFICATIONS:
Approximate Part Size Capcity .................... 14" x 10"
Current Fixtured Part Cap for Shafts with 
Pnuematic Clamping is Aproximately ............... 1" x 8.5"  
Drilling Capacity Diameter ....................    .031 - .371" Maximum
Drill Head Stroke ( Hole Depth ).................. 10" Maximum
Aproximate Penetration Rate ( Brinell 225)........ 3.5"per Minute
Spindle Speeds ................................... 2,000 - 8,000 rpm
Spindle Horsepower................................ 1 HP Blador Motors
Electrics of Spindle Motors....................... 2o8/230/480/3/60
Approximate Machine Dimensions Set Up............. 84" x 144"x 72" High
Approximate Machine Weight........................ 12,000 lbs