Cincinnati 3 Spindle 5 Axis Aerospace CNC Gantry Profiler
New 1979 Updated 2009 , Serial # 430556V79-0030
Table...................... 30' x 15'
A & B Axis 20 Deg.
Spindles 30 HP
Spacing Between Spindles 40?
Z Axis 18?
Range 18-3600 RPM (4 Gears)
Taper Cat 50
AMP 400, 480 VAC
Table 30? X -15? Y
Travel X 204?
Travel Y 84?
The 3 spindle gantry was retrofitted with a Fanuc 31i controller and
Servos in 2009. When we did the retrofit, we removed almost all of
the magnetics that came new on the machine and added more compact
relays, power supplies and I/O racks for control distribution. We
used the existing wire and cables for the 120 and 24 control
circuits. We ran new power leads (Fanuc) and encoder feedback
(Fanuc) cables to the new motors and drives (Fanuc). The spindle
drives are all 480VAC, Allen Bradley, 1336 plus spindle drives and
controls that drive the 30 HP motors. The newest addition to the
machine is the Turmoil hydraulic oil cooler that we added last month
to assist with cooling the hydraulic oil.