|
|
Used CNC Lathes FOR SALE CNC Turning Centers for sale
CNC Lathes, CNC Turning Centers
| |||||||||||||||||||||||||||||||||
| CNC Lathes Horiz/Chuckers/Universals | Stock Number | Click for photo and specs |
| DOOSAN PUMA VT-450TM TWIN SPINDLE VERTICAL TURNING CENTER, Fanuc 18i-TB CNC Control, 15" 3-Jaw Chucks, 22" Swing, 17.7" Max Turning Diameter, 17.7" Max Turning Length, 2500 RPM Spindle, 12-Position Turrets w/ Live Tooling, New 2005. | STK# Q10287 |
|
| FUJI ANS-31P, Fanuc 18i-LNB CNC, 16/5" Swing, 8" Chuck, Tool Probe, Part Probe, 8-Position Turret, New 2008, 2 Available. | STK# K15329 |
|
| HARDINGE TALENT 10/78 with LIVE TOOLING, Fanuc 0i-TC, 10" 3-Jaw Chuck, 23" Swing, Prog. Tailstock w/ 23" Centers, 3500 RPM, 12 Station Turret, New 2007. | STK# Q10317 |
 |
| JOHNFORD HT-60C-2D 4-Axis, Fanuc 18T, 34" Swing, 24" Chuck, 23" Swing Over Cross Slide, 60" Between Centers, 4-Axis Upper and Lower Turret, 2004 | STK# K15227 |
|
| LICO LNC42, Mitsubishi 520 CNC control, 10.2" swing, 1.6" chuck, 3" spindle bore, 8 position turret, 1995. | STK# K15644 |
|
| NAKAMURA WT-300 MMYS 8-Axis, Fanuc 18i-TB, 2.55" Bar Capacity, 10.6" Max Turning Diameter, Live Tooling in Both Turrets, Sub-Spindle, C-Axis in Both Spindles, Y-Axis Milling, LNS Bar Feeder, Upper and Lower Turret, 2005 | STK# K15652 |
|
| ROMI M20, Fanuc 21i CNC, 20" Swing, 12" Chuck, Tail Stock with 80" Between Centers, 2000 RPM, Steady and Follow Rests, New 2006. | STK# K15632 |
|
| TACCHI FTF-1600, Fanuc 0T-C CNC, 45" Swing, 31" Chuck, 14" Thru Hole, Tool Turret, 100 HP, 560 RPM, Front and Rear Power Chucks, 2006. | STK# K15604 |
|
| 78" TOSHIBA CNC VERTICAL TURNING CENTER, Fanuc 18T CNC, 78" Table, 90" Swing, 59" Max Turning Height, 12 Station Tool Changer, 60 HP, 200 RPM, New 2002. | STK# K15656 |
 |
 |
Financing Available |
|
|
|
