Great American Equipment Company

6" WOTAN CNC Horizontal Boring Mill Rapid 5  for sale

WOTAN Rapid 5 6.3" Spindle CNC Floor Type Horizontal Boring Mill

Stock Number K14186

6" WOTAN CNC Horizontal Boring Mill Rapid 5  for sale

6" WOTAN CNC Horizontal Boring Mill Rapid 5  for sale

6" WOTAN CNC Horizontal Boring Mill Rapid 5  for sale

6" WOTAN CNC Horizontal Boring Mill Rapid 5  for sale

ACTUAL PHOTOS
   
WOTAN RAPID 5 CNC HORIZONTAL BORING MACHINE
New In 1985 ,Rebuilt between 2000-2010

Equipped With:
CNC Control System HEIDENHAIN TNC 430,  Wotan manual angular milling head
(8) pieces of floor plates heavy design Floor plates 177" x 90" x 16" Thick
72 Station Automatic Tool Changer, Chip conveyor on the complete length of the foundation, Coolant System.
 
Technical data:
- Spindle diameter .....................6.3"
- Spindle........................................ SK 50 DIN 69871 50 Taper 
- X-Axis........................................... 630"
- Y-Axis........................................... 175.4"
- W-Axis........................................... 35.4"
- Z-Axis............................................ 31.5"
- Ram.............................................. 14" x 14"
- Boring spindle............................. ISO 50
- Milling Spindle............................. 11"
- Feed (X,Y,Z,W-Axis)..................... .0394 - 197 ipm
- Rapid Speed (X,Y,Z,W-Axis)........ 197 ipm
- Machine length.............................. 865" 
- Machine width................................ 172"
- Machine height................................ 343"
- Machine weight............................... 165,000 lbs 

Rotary Table Specifications:
Conventional Turning Table Mfg by  STOLLE
New 1975
Clamping surface 2.500 x 3.000 mm
Power 75 kW
Table load 80,000 lbs.
Positioning 4 x 90˚
Table Weight approx. 50.000 lbs.
 
Appears to be in Excellent Condition.
The machine was retrofitted and upgraded during the last several years:
In 2000
Complete new electric and CNC control by Heidenhain TNC 430 incl. axis motors, linear scales, cabling, electrical cabinet etc.
In 2004 
The beds were ground and polished, the aerostatic ways of the column on the bed was upgraded with a double pocket system which improves the motion accuracy. 
The y axis ways were reconditioned and all air nozzles were replaced.
In 2008 
The Spindle head was modernized and redesigned. 
The hydrostatic spindle bearing was replaced by a roller bearing. This was the basic to upgrade the spindle speed form 1100 rpm to 1800 rpm. 
The main drive was replace by an asynchronous motor make KESSLER. All bearings in the gearbox were replaced. 
The spindle was redesign for to tapers SK 50 DIN 69871 and DIN 69872.
In 2010 
The counterbalance system is hydraulic design. The pressure tank of the system was replaced.
 
The machine is currently in plant, under power in Germany. It will be removed from service in early February 2014
 
Great American Equipment can help you find used machinery...

Send mail to Great American Equipment Company with question or comments about this website.
Privacy Policy  Copyright 1998-2016 Great American Equipment Co